BLOCKSMITH WORKS - COMMUNITY TOOL CRIB
Contributor 002: Steve Jans
Rounding Jack - updated single-color project
Updated September 14, 2026

Original rounding-jack design by Steve Jans. Shared with permission.
Steve retains ownership and authorship. The supplied 3MF is unchanged.
Personal use only. Neither the files nor printed models are licensed for
sale without Steve's express written permission as file owner.

Original filename: Rounding Jack One Color.3mf
Website filename: Rounding-Jack-One-Color.3mf
Size: 3,293,152 bytes
SHA-256: 9c10deb8d846c5cef39449c7ffae494a638659dbf4e0e7811464c753a81fde73

This project replaces the previously posted five-plate one-/two-color
package. It contains seven parts on two plates, with inch and centimeter
markings on the main frame. All parts are assigned to one filament.

Open as a project in Bambu Studio and review settings for your own printer
and material. Steve's saved profile is X1 Carbon, 0.4 mm nozzle, Generic PLA,
0.2 mm layers, 6 walls and 25% infill. These are supplied settings, not
Blocksmith validation of a particular printer or material.
Archive integrity and closed mesh edges were checked. Assembly fit and
physical printing have not been verified by Blocksmith Works.

PACKAGE CONTENTS
- Rounding-Jack-One-Color.3mf: Steve's supplied project, unchanged.
- Steve-Jans-Rounding-Jack-Assembly-Instructions.txt: earlier September 5
  reference notes. Hardware lengths are not verified for the revised parts.
- Steve-Jans-Contribution-Acknowledgement-2026-09-14.pdf.
- Steve-Jans-Conformer-Assembly-Video.txt and .url: a separate CONFORMER
  assembly video, not rounding-jack assembly instructions.
- This README.

WITHDRAWAL
Steve may request withdrawal by replying to our contribution email,
emailing BlocksmithWorks@gmail.com, or using the website feedback form.
Identify Contributor 002 and the affected file or video link. Blocksmith
Works will deactivate the relevant download or link under its control.
This cannot recall copies already downloaded by others.