V1.0.18 Crown Plugs — October 3, 2026

Choose Tool > Plug in the Crown Workshop. Height: 1–2.5 inches (2.54–6.35 cm); flat top, default 1.5 degree inward taper (1/1.5/2 choices), and 1–3 mm top edge radius. The wider bottom follows the same selected crown size, oval and sweatband allowance. Three round 25.4 mm holes pass through at center and +/-40 mm. Plug and crown settings are retained separately. A plug does not use the crown stand's blind sockets.

Walls, bottom shell layers and infill are slicer settings. Supported Bambu 3MF projects include the established 8-wall 0.4 mm or 6-wall 0.6 mm preset, with matching top/bottom layer counts and 40% gyroid. STL is model-only. PLA can be used for dry, unheated trimming; use material appropriate to heat, steam and working loads. No new physical print is claimed for this release.

BLOCKSMITH WORKS — START HERE
=============================

IMPORTANT: EXTRACT THE ZIP FIRST
--------------------------------
Do not run Blocksmith Works from inside the downloaded ZIP file.

1. Extract the complete ZIP.
   Windows: Right-click Blocksmith-Works.zip and choose Extract All.
   macOS: Double-click the ZIP and wait for the folder to appear.
   Linux: Choose Extract Here or your system's equivalent.

2. Move the extracted Blocksmith-Works folder to the permanent location where
   you want to keep it. Keep every file and folder inside it together.

3. Open the extracted folder and double-click index.html.


OPTIONAL: ADD A BLOCKSMITH WORKS DESKTOP ICON
---------------------------------------------
The shortcut helpers use the included brass “B” medallion. Install the shortcut
only after the extracted Blocksmith-Works folder is in its permanent location.
If you move the folder later, run the helper again. Each helper asks where you
want the Blocksmith Works launcher created before it makes any shortcut.

WINDOWS
1. Double-click "Install Blocksmith Shortcut - Windows.cmd".
2. Choose Desktop, Start menu, or both when the helper asks.
3. If you choose Start menu, you can pin the launcher to the taskbar by opening
   Start, searching for Blocksmith Works, right-clicking it, and choosing Pin to
   taskbar. Windows requires this final user action.

macOS
1. Control-click "Install Blocksmith Shortcut - macOS.command" and choose Open.
2. Choose Desktop, Applications, or both when the helper asks.
3. If you choose Applications, you can keep the launcher in the Dock by dragging
   Blocksmith Works from Applications to the Dock. macOS requires this final
   user action.

LINUX
1. Right-click "Install Blocksmith Shortcut - Linux.sh", allow it to run as a
   program, and then double-click it. You may also run it from a terminal.
2. Choose Desktop, applications menu, or both when the helper asks.
3. If you choose the applications menu, you can pin the launcher by finding
   Blocksmith Works and choosing Add to Favorites, Pin, or Add to Panel. The
   wording varies by Linux desktop.


NEED HELP?
----------
Email BlocksmithWorks@gmail.com and include your operating system plus a
screenshot of what happened.
